EV3-custom blocks

HELLO!!!! Okay so I just want to point out that there will be an article in the future explaining what EV3 is, so if you have never heard of EV3 I suggest you start there.

Today we are going to create a custom block, using the Lego Mindstorms EV3 app.

First, you must open the EV3 app.

Second, create a project. It is done by clicking to plus at the top left part of your screen.

Third, create the blocks that you want inside your custom block.

Fourth, you select your blocks. While they are selected, go into the header and press tools then my block builder.

Fifth, click on the block builder and design your block name, icon, and description for your block.

***Note: spaces not allowed in block name. Substitute space with underscore.

Sixth, Adjust parameters as needed.

Finally, click finish.

 

NOW YOU ARE DONE!!! CELEBRATE YOUR NEWFOUND KNOWLEDGE!!!

And don’t forget: ROCK THE WORLD!!!!!

BYE!